I wanted to go through the process used to make each book. For the most part, making books is a two day task.
I usually start by printing the book covers. The book cover was one of the most difficult parts to create. The length of the poster board used for the cover isn’t quite as long as legal paper, but longer than regular paper. This made formatting the cover difficult, especially the binding.
I didn’t use fancy programs or templates specifically designed for book covers. I created the cover with a word processor (Apache OpenOffice Writer) and a paint shop program. I used the paint shop program to create a vertical image for the binding. Then, I imported the image to the word processor and aligned it vertically in the center (to the right on page 1). Then, set the margin to zero.
I aligned the back cover of the book to the left of the binding image. The next page down (page 2) was used for the front cover. When the cover prints, they’re in the proper order as long as I select two pages per sheet and order the printing, left to right, then down when printing.
However, getting the layout to print correctly took plenty of tinkering. I started by taping two pieces of regular size paper together to get the actual length of the book cover. Then, after I printed a cover, I would make adjustments to the layout and printer property settings until the front cover, binding and back cover lined up in accordance with a book.
After the layout was as good as possible, I went to the printer property settings and adjusted the paper size settings. I changed the settings to “User Defined” and entered paper sizes similar to the size being used. The setting that worked for me was a paper size slightly smaller than the size of the paper I was using. To save paper I often printed over the same taped pages.
Once the cover was aligned, I purchased large sheets of poster board. I have an inexpensive, letter size paper cutter. As a result, I have to cut the poster board with scissors into sheets slightly larger than the actual cover. This way they’ll fit in the paper cutter. Then, I cut the poster board to the proper cover size via the paper cutter.
From there, I print the covers by feeding the poster board through the printer manually. Due to the thickness of the poster board and the length, they aren’t able to go through the normal printing tray. Even at this stage, adjustments still needed to be made before I was able to print the final version of the cover.
The printer property settings allow the user to set the type of paper to “thick”. If the paper thickness setting wasn’t set to thick, the entire cover would get smudged.
After printing the covers, I print the actual book pages. Four pages are printed per sheet of letter sized paper. The two odd pages on the front and the two even pages on the back. I print the front two pages first. Then, the two back pages.
Figuring out how to print the pages with a format that could be used for a book was an experiment within itself. The side of the pages sitting against the binding needs extra space.
As a result the margins needed to be adjusted. I’m fairly sure I did this via the tool bar: Format->Page->Page Tab.
I also needed to figure out how to print the pages. OpenOffice Writer has quite a few different print settings and each produce different results.
With additional tinkering, I figured out the page printer settings. I print the front (odd pages) first. Via the tool bar, I go to print and then the page layout section. I select “Left to Right, Then Down” and “Front Sides, Right Pages.” I select two pages per sheet and I check the box that says “Draw a border around each page”. The borders around the pages make cutting them in the center much easier. Then, I select Print.
After the odd pages printed, I would put them back in the printer tray. For my printer (Brother), I placed them face up, with the top of the page facing to the left. Then I would print the back side (even pages). I would go back to print via the tool bar. Then, to the page layout section. This time I would select “Right to Left, Then Down” and “Back Sides, Left Pages”. I would also select two pages per sheet and check the box that says “Draw a border around each page”.
To make things more difficult, I am not able to print an entire book at once. I don’t know if there are to many pages, or somethings wrong the software I’m using. However, every time I tried, the pages wouldn’t print as specified. I only mention this in case others experience the same issues. I specify a set number of pages to print and print the book in sections. That resolves the issue.
Even though this way takes longer, it’s actually a benefit. There are a plenty of things that can go wrong with each printing. I’ve dealt with the ink running out, paper jams, and yes, even human error while adjusting the print settings. Printing the book in sections saved plenty of paper and ink. If something does go wrong, I don’t waste as much paper and ink, because less pages are being printed.
After I print the pages, I cut them into two pieces with a paper cutter. The paper cutter I own allows me to cut about 5 sheets at a time. That comes out to about 15 cuts per book and takes me about twenty-five minutes.
Ensuring the pages are lined up as perfectly as possible with the paper cutter is important. Having pages that are all the same size with clean cuts helps the glue attach to all the pages.
Next, I put the pages in order and verify that there aren’t any pages missing. Once they’re in order I start to glue the bindings. I take binder clips and attach them to each side of the book (about a half inch from the binding), ensuring that the book stays together as it should. Then, I hang the binding side of the book off of something like a table.
I use a specific glue for book binding. I’ve tried other glues, but they don’t work as well. The book glue acts like a gel. It’s flexible and seeps into the pages securing them in place.
I use a foam paint brush to apply the glue. I try to get as much in-between the pages as possible. I also apply a little to the side edges of the binding. I find that applying a little glue to the side edges gives the book a stronger binding. After applying the glue, I usually try to place something on top of the binding to press the pages together and let the glue dry overnight.
The next day I glue the cover to the binding. I line the cover up with the book and use a pen to make slight marks on the inside of the cover where the binding folds at each end. Then, I take a ruler and line it up with the marks. From there, I make folds for the front and back sections of the cover, creating two creases and the book end. Finally, I simply place glue on the inside of the cover binding and attach it to the book. I let the glue dry overnight. That’s it. After the glue dries, the book is finished.
Far From Perfect can be purchased via: https://www.georgefarina.net/farfromperfect
I spent most of 2017 writing a book called “Far From Perfect” (described via the below press release). Before I started writing, I decided to put together a timeline of different events I went through during the span of my life. This was done on a spreadsheet. I went back as far as I could remember. I’d enter the date of the event. In the next field I’d write a description. I ended up with about four hundred lines. From there, I decided to start writing.
Once I started writing, I wrote six days a week and spent almost the entire day typing away. I’d go to bed thinking about what I wanted to write the next day. If I thought of something I felt couldn’t wait, I’d often get up in the middle of the night. I’d fire up the computer and jot my thoughts down.
The book took about nine months to finish. Then, I spent about a year making adjustments, while trying to figure out the best way to move forward with publishing. During that year I was often traveling. The adjustments and research were done sparingly, as time permitted. After researching the many different avenues for publication, I decided to take the self publishing route.
Currently, the entire book is being printed and bound by the author. Each book takes about a half hour to put together. Then, the binding is glued and set to dry overnight. The next night the cover is glued to the binding and set to dry overnight. From start to finish it takes two days to create each book. Because of this process, each book is a little different. This is a self published book in every sense of the word. Each book purchased is truly a one of a kind.
The book was written, typed, edited, and proofread in its entirety by the author. Please be understanding in regard to potential errors. There are over 70 thousand words and 285 pages. Even though the author used diligence, he is only human and as such prone to making mistakes. Far From Perfect takes place in East Hampton, Connecticut, Cromwell, Connecticut and Miami, Florida.
Without further ado, I would like to announce the publication of “Far From Perfect” via the below Press Release :
Far From Perfect Press Release:
(Date: 7-8-2018) This press release is to announce the publication of my first book: Far From Perfect – By George Farina. I’m not a New York Times Best Selling Author. I’ve read books on their best seller list. The words flow effortlessly. They are rhythmic. They thrust a person’s imagination into a new and exciting world. Parts of what I’ve written might come close. I guess that’s up to the reader to decide.
In this book I tell a story. It’s a true story. It’s a story that was written with a lot of thought. It’s a story being told as accurately and detailed as possible. It’s a story detailing part of a persons life. It is also an informative story. I try to pass on as many of the things I’ve learnt as possible.
This is a book about a life. It’s about the experiences encountered during that life. The things witnessed. Throughout that life many different events occurred. People entered and left. These were people I met in school. They were neighbors. They were people I met at an abandon 18-wheeler truck trailer, during a time when I didn’t have any other place to stay. They were people I met at events, at work, and even in the middle of the street. I met people through chatrooms, Myspace and Plenty of Fish.
Many of these people took parts of a “far from perfect” life to enjoyable. Their personalities; their character; their charisma made parts of my life exhilarating. They gave me many amazing memories. I relived them vicariously while writing. These are memories I accumulated over the course of forty years.
With that said, as the title states, my life was far from perfect. I’ve been through plenty of struggles. Some of the struggles I didn’t include, simply because I don’t like thinking about them. I know I’m not the only person on this planet who has struggled throughout their life. I didn’t set out to write a book. Circumstances led me to writing. Now that the book is finished, I think people might like hearing a few of the stories I’ve detailed. Others who’ve been through struggles might relate.
When I started writing, I wasn’t in a good place. My head was filled with all that went wrong. It was filled with all the terrible. As I continued writing, I started thinking about the people I’d known, and all the crazy things we’d been through. I thought about their personalities and their sayings. I often laughed to myself as I wrote about them. They drowned out much of the terrible.
Even with many of the terrible times excluded, I wrote about enough struggles to justify keeping the title. I hope the people who decide to read Far From Perfect find it enjoyable.
Far From Perfect can be purchased at: https://www.georgefarina.net/farfromperfect
I’m finally getting caught up and should be consistently online very soon. During the time I was without internet I made use of my time by working on an About Me page for this website. Writing about the old AOL, GeoCities and FortuneCity communities kind of inspired me. The page is launched – at least for the most part – but it’s not exactly how I want it yet and I don’t have it linked in the header.
When I first decided to make the About Me page I was thinking about the old AOL / GeoCities / FortuneCity pages along with Myspace and Facebook. I wanted to combine some of my favorite aspects of the previously mentioned websites, minus some of the psychedelic colors and flashy-ness that was often associated with the free hosting pages and Myspace.
One of the things I always loved about the old AOL communities was the guestbooks. I know guestbooks are defunct, but that doesn’t mean I couldn’t bring one back to life. Even if for nothing more than nostalgia purposes.
On my old Myspace page I had an area that that featured a bunch of interview style questions. I would answer them and both questions and answers would be published to the page. Once published the Q&A looked like I was being interviewed. At the time that was a very unique feature that I feel provided visitors a clearer picture of what I was really about. Another feature I had on my page was a list of my favorite quotes. I know that sounds simple enough, but you just don’t see that very often on personal web pages today. And of course I had the photo gallery (as I do with Facebook) which is usually fairly popular.
Once I migrated to Facebook I really liked the idea that you could pick your favorite books, movies and television shows and have them displayed on your page. And most of all I loved the idea of connecting with old friends, the wide variety of stories featured on the news feed and privacy settings. Even though the last three features are not related to this post, I wanted to point them out because they are part of what makes Facebook an extremely special website.
I think when the features I mentioned are combined, visitors get a decent idea of the person who created the homepage they are viewing. I tried to add as many features as I could to my About Me page. Overall I think it came out ok – almost like a first draft, but I do think it looks a little bland. I’m thinking about adding some bars (AOL, GeoCities Style) to separate the sections and mixing in some color. But not the crazy overwhelming color and animated gifs that were popular in the 1990’s.
Here is the link: About Me
Sorry for the lack of posts this past week. I’ve been traveling a bit and was without internet for a few days. I have some catching up to do, but things should be back to normal in no time.
One thing I like to do is come up with a creative domain names, register the domains and then design a website specifically for the domain. Most of the domain names I have are developed and active. However, I do have a few undeveloped domain names with potential to be turned into cool websites. The problem is, at this moment of my life, I don’t have the time or ability or even the motivation to develop the domains. And even if I did come up with a creative idea and found the time to develop the website, I certainty wouldn’t have the time to promote it properly. I’m already up to my ears in social media accounts. And despite all the accounts I’m still not getting that much traffic. Although, that’s because many of the accounts don’t have the followers necessary to deliver meaningful traffic. Not to mention, I have to make getting the three inactive / maintenance mode e-commerce websites up and running a priority before I can get into any new projects.
I hate sitting on good domains, because it takes away the opportunity of potential development. Even so, I only have a few and I’m going to hold on to them in hopes I’ll be able to develop them myself in the future.
As for the time being, my main focus is going to be adding content and promoting News Stop, Wowzers and UpperCut. The great thing about adding content is it’s different everyday. This is an aspect I really enjoy because I come across so many excellent, interesting and informative stories. As for promoting – in general it isn’t my thing. I always had the mindset that a good product promotes itself (at least after a certain point). And when I see to much advertising it’s a turnoff. However, I seem to do ok with social media. Maybe because it is networking with the end result often being promotion.
In a post about a week ago, I mentioned I was going to spend more time promoting through social media – I did. Though, most of the time went to organizing and creating accounts for each active website. Directly below are the social media accounts (at least the major social media accounts) I now have for each website (feel free to network):
If you noticed I don’t have any Tumblr accounts. I’m hoping to change that this week. I’ve heard some good things recently about Tumblr regarding the websites technology and the traffic for which it can deliver. I’ll soon find out if that’s true.
—- Updates —-
Revamped the main page so only active websites are being displayed. Removed all tables from the entire website; reorganized the “current websites” page and created individual description pages for each website.
All Kinds Of Good Stories were added to News Stop over the past week. Here are a few of my favorites:
After a slow couple of weeks for UpperCut, there were some very cool stories submitted. Here are some of the better stories:
All the tables from the main page have been removed and replaced with div tags. Now the same has to be done to the rest of the this site. Web sites that use tables incorrectly aren’t penalized (at least not yet) by search engines and still work in web browsers. However, tables are no longer intended to be used as part of the – design of a web site – in HTML5. So it is time to bring this site into the 21st century and avoid potential problems in the future.
An e-mail subscription form has been added to NewsStop.us – So please subscribe to the newsletter! This has been a long time coming and the idea is that it will help to increase readership.
Two new news stories have also been added to News Stop:
The Week Ahead
I’m hoping to apply a bit more time to social media marking in the week to come – especially regarding News Stop and Wowzers. The long-term plan is to generate revenue from the two sites via adsense. Right now neither site generates much traffic. One site is new and the other one never gained much momentum and has been dormant for around a year. So I have my work cut out for me when it comes to building up readers / users / traffic.
I am far from an expert in marketing, but I do understand social media to an extent. Currently, I’m only using Twitter to drive traffic towards the two websites. And in regards to Twitter, I try to use it as intended, meaning I don’t use programs to add thousands of followers at once. This makes it a bit less effective in the beginning because it takes more time to build up followers.
Going forward I am hoping to start using additional social media sites including Reddit, StumbleUpon, Tumblr, Google+, Newsvine, LinkedIn, Pinterest, Delicious, Facebook, and Youtube. I believe I have accounts for most of these sites, but not many followers / connections. The great thing about promoting a site via social media is the cost: Free. At least if you don’t outsource. The bad thing is it can take up a lot of time if you decide to post to all the top social media sites. Moreover, it is very important to add followers / connections in order to maximize the amount of users who see the content and links posted.
With that said, I did discover one way to help save time when when submitting content to multiple social media sites. And that is to use a FireFox extension called ProfileSwitcher. ProfileSwitcher lets users switch between social media profiles without having to log-in and out of each social site. This saves a substantial amount of time.
I also plan on commenting more on other peoples blogs and within message boards. When the opportunity presents itself and if ones comments are legit and relevant, both blog and forum links can be very valuable. Plus, they are a great way to make connections around the web.
GreenTeaBreak.com – one of my favorite sites hasn’t been updated since February. I do have a new post in the works, but it is still a ways away because of additional research that needs to be completed.
The two e-commerce sites I ran before I got sick are very far from going back online. Mostly, because I am just not in a position to get them up and running properly. Even when I get into a situation where it is feasible to put The Dusty Loft back online, I’ll need to build up inventory beforehand.
The other e-commerce site I ran was MagicCity.us. That site was a mess even before I got sick. It is made up of an e-commerce website, a blog and a directory – none of which mesh well together with the current design. I’d defiantly want to redesign the whole thing so it fits together better. I figure at worst I can work on a new design and contribute to the blog portion of the site until it makes sense to re-open the e-commerce store.